We got to find someone using a TS2000. Either Kenwood changed the coding or their is something wrong with the interface. Any TS200/DXBase users out there???
----- Original Message ----- From: "Phil ON4VP" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, December 04, 2002 11:54 AM Subject: Re: [DXBase] setting mode won't work > Hi Clark > > I really tried EVERYTHING ??? > > 1) triple checked my bandplan. > 2) set the log default to check for band/mode from rig when logging QSO > (this works I can get freq into log) > 3) everytime I click a spot, the rig's mode is set to correct mode but > immediatly is reset to USB when the freq is changed to (QSY to spot) > 4) the same happens on 144 Mhz but in FM instead of USB. > > So I end up comming back to USB (1.8 - 50 Mhz) or FM ( 144-440) with all > spot qsy's. > I tried all settings, using ts2000 - 570 - 870, with, without bandmap, > etc... > > No luck ... > > Phil > > ----- Original Message ----- > From: "Clark L. Stewart" <[EMAIL PROTECTED]> > To: "Phil ON4VP" <[EMAIL PROTECTED]> > Sent: Wednesday, December 04, 2002 5:50 PM > Subject: Re: [DXBase] setting mode won't work > > > > Phil, > > > > I may not be able to help you but I do have my TS-2000 running with > > DXbase 2002 and it follows the bandplan with incoming spots > > perfectly. Sometimes, too perfectly. The only problem I have is that if > a > > station is operating CW high in the band then DXbase will set the radio to > > FSK instead of CW but it is doing just what the bandplan tells it to do. > > > > If you want, give me more specific information and I'll see what my > > radio does. Does this happen on EVERY spot, regardless of band or > frequency? > > > > Just to make sure my system was working I connected to an Internet > > PacketCluster then clicked on spots on various bands and modes. The > > TS-2000 QSY'd to 80-M LSB, 40-M CW, 10-M USB and 10-M CW. BOTH band and > > mode changed when I clicked in the "Type" column of the incoming spot. > > > > Here is my set-up: > > > > Tools | Options | User Options > > > > HF Radio Tab > > > > Kenwood TS-870 > > > > (Checkmark) Connect HF Radio Serial Interface > > > > (Radio Button) None > > > > Set HF Radio RTTY Mode (Radio Button) FSK > > > > (Checkmark) default DTR High > > > > Serial Port COM2 > > Baudrate 9600 > > Parity None > > Word Length 8 > > Stop Bits 1 > > > > If you are running DXbase 2003, I will load up my version of DXbase > > 2003 and try it with my TS-2000. > > > > Let me know anything you want me to check and I'll see what I can do > > to help you get your TS-2000 working with DXbase. > > > > > > > > At 08:57 AM 12/4/02 +0100, you wrote: > > >I still struggle to get my TS2000 into exact mode > > > > > >When I click the spotted station, the freq is set but I see the mode > > >jumping to the mode in the bandplan and then immediatly jumps back to > USB, > > >this is very enoying. > > > > > >Any tips ... > > > > > >Tnx, Phil ON4VP > > > > > > CUL, 73, Clark, W8TN > > > > email: [EMAIL PROTECTED] or [EMAIL PROTECTED] > > Webpage: <http://www.w8tn.com> > > > > > > > > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase > >
