Yep, I use the TS-2000 and DXBase Don't have any problems here. There is one thing that I can think of that might be your problem. Please read the manual Page 15 Operating Conveniences about changing and setting the AUTO MODE set points in the TS-2000. Let me know it this was your problem.
73 de Tony, KD4K My Weather Page http://home.adelphia.net/~tonycash/ My Ham Radio Page http://home.adelphia.net/~tonycash/kd4k/radio.html Sawnee Mountain (WB4GQX 147.15 +.600) Repeater Page http://home.adelphia.net/~tonycash/sawnee/index.html ----- Original Message ----- From: "FireBrick" <[EMAIL PROTECTED]> To: "Phil ON4VP" <[EMAIL PROTECTED]>; <[email protected]> Sent: Wednesday, December 04, 2002 1:04 PM Subject: Re: [DXBase] setting mode won't work > We got to find someone using a TS2000. > Either Kenwood changed the coding or their is something wrong with the > interface. > Any TS200/DXBase users out there??? > > > > ----- Original Message ----- > From: "Phil ON4VP" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Wednesday, December 04, 2002 11:54 AM > Subject: Re: [DXBase] setting mode won't work > > > > Hi Clark > > > > I really tried EVERYTHING ??? > > > > 1) triple checked my bandplan. > > 2) set the log default to check for band/mode from rig when logging QSO > > (this works I can get freq into log) > > 3) everytime I click a spot, the rig's mode is set to correct mode but > > immediatly is reset to USB when the freq is changed to (QSY to spot) > > 4) the same happens on 144 Mhz but in FM instead of USB. > > > > So I end up comming back to USB (1.8 - 50 Mhz) or FM ( 144-440) with all > > spot qsy's. > > I tried all settings, using ts2000 - 570 - 870, with, without bandmap, > > etc... > > > > No luck ... > > > > Phil > > > > ----- Original Message ----- > > From: "Clark L. Stewart" <[EMAIL PROTECTED]> > > To: "Phil ON4VP" <[EMAIL PROTECTED]> > > Sent: Wednesday, December 04, 2002 5:50 PM > > Subject: Re: [DXBase] setting mode won't work > > > > > > > Phil, > > > > > > I may not be able to help you but I do have my TS-2000 running > with > > > DXbase 2002 and it follows the bandplan with incoming spots > > > perfectly. Sometimes, too perfectly. The only problem I have is that > if > > a > > > station is operating CW high in the band then DXbase will set the radio > to > > > FSK instead of CW but it is doing just what the bandplan tells it to do. > > > > > > If you want, give me more specific information and I'll see what > my > > > radio does. Does this happen on EVERY spot, regardless of band or > > frequency? > > > > > > Just to make sure my system was working I connected to an Internet > > > PacketCluster then clicked on spots on various bands and modes. The > > > TS-2000 QSY'd to 80-M LSB, 40-M CW, 10-M USB and 10-M CW. BOTH band and > > > mode changed when I clicked in the "Type" column of the incoming spot. > > > > > > Here is my set-up: > > > > > > Tools | Options | User Options > > > > > > HF Radio Tab > > > > > > Kenwood TS-870 > > > > > > (Checkmark) Connect HF Radio Serial Interface > > > > > > (Radio Button) None > > > > > > Set HF Radio RTTY Mode (Radio Button) FSK > > > > > > (Checkmark) default DTR High > > > > > > Serial Port COM2 > > > Baudrate 9600 > > > Parity None > > > Word Length 8 > > > Stop Bits 1 > > > > > > If you are running DXbase 2003, I will load up my version of > DXbase > > > 2003 and try it with my TS-2000. > > > > > > Let me know anything you want me to check and I'll see what I can > do > > > to help you get your TS-2000 working with DXbase. > > > > > > > > > > > > At 08:57 AM 12/4/02 +0100, you wrote: > > > >I still struggle to get my TS2000 into exact mode > > > > > > > >When I click the spotted station, the freq is set but I see the mode > > > >jumping to the mode in the bandplan and then immediatly jumps back to > > USB, > > > >this is very enoying. > > > > > > > >Any tips ... > > > > > > > >Tnx, Phil ON4VP > > > > > > > > > CUL, 73, Clark, W8TN > > > > > > email: [EMAIL PROTECTED] or [EMAIL PROTECTED] > > > Webpage: <http://www.w8tn.com> > > > > > > > > > > > > > > > _______________________________________________ > > DXBase Reflector - Please visit us on the web at www.dxbase.com > > - - - - - - - - - - - - - - - - - - - - - - - > > To UNSUBSCRIBE please visit: > > http://mailman.qth.net/mailman/listinfo/dxbase > > > > > > > _______________________________________________ > DXBase Reflector - Please visit us on the web at www.dxbase.com > - - - - - - - - - - - - - - - - - - - - - - - > To UNSUBSCRIBE please visit: > http://mailman.qth.net/mailman/listinfo/dxbase >
