Thanks Oli for the information. >> X_MODE_0 = 1024x768 >> and maybe change >> XSERVER = ati >the X_MODE variable is not supported yet in ubuntu ltsp, add >the >correct >values for X_HORZSYNC and X_VERTREFRESH to get the >resolution you want,
With my lts.conf like this: [Default] SERVER = 192.168.1.3 # XSERVER = auto XSERVER = ati X_MOUSE_PROTOCOL = "PS/2" X_MOUSE_DEVICE = "/dev/psaux" X_MOUSE_RESOLUTION = 400 X_MOUSE_BUTTONS = 3 USE_XFS = N X_HORZSYNC = 1024 X_VERTREFRESH = 768 # SCREEN_01 = startx using either XSERVER auto or ati I get a terminal login like Ubuntu 5.10 "Breezy Badger" ltsp tty1 ltsp login: but when I attempt to login it dislays "Login incorrect". ctrl-alt-f1 through ctrl-alt-f6 give me a different vt. ctrl-alt-f7 gives me a black screen with a cursor blinking in the upper left. With my lts.conf like this: [Default] SERVER = 192.168.1.3 XSERVER = auto X_MOUSE_PROTOCOL = "PS/2" X_MOUSE_DEVICE = "/dev/psaux" X_MOUSE_RESOLUTION = 400 X_MOUSE_BUTTONS = 3 USE_XFS = N X_HORZSYNC = 1024 X_VERTREFRESH = 768 SCREEN_01 = startx I get xserver failed, press <enter> to continue. So I press enter and am presented with the login prompt again but attempting to login gives the same as above. ctrl-alt-f1 through ctrl-alt-f6 give me a different vt. ctrl-alt-f7 doesn't work. With this setting: [Default] SERVER = 192.168.1.3 # XSERVER = auto XSERVER = ati X_MOUSE_PROTOCOL = "PS/2" X_MOUSE_DEVICE = "/dev/psaux" X_MOUSE_RESOLUTION = 400 X_MOUSE_BUTTONS = 3 USE_XFS = N X_HORZSYNC = 1024 X_VERTREFRESH = 768 SCREEN_01 = startx I get the busybox prompt with this error: /bin/sh: can't access tty: job control turned off # After testing a few changes and the necessary reboots my client gets to an inconsistent state where it might only display the busybox prompt and nothing else or have some other problem. In order for changes to get read from lts.conf I have to reboot the server. In fact it seems like in order to get reliable testing resutls I need to reboot the server after every change of lts.conf. Looking in /etc/init.d/ I can't see a service that I could restart instead of rebooting. Is there a service I should be restarting instead? It seems like I can't find a reliable starting point from which to make changes. My installation is default where I've updated the system per the update manager, enabled dhcp per the server setup instructions. -- [EMAIL PROTECTED] SDF Public Access UNIX System - http://sdf.lonestar.org -- edubuntu-devel mailing list edubuntu-devel@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/edubuntu-devel