Don, How do you know so much detail, did you help design these things? :-)
You always have help for everyone to make our experience even better so thank you very much!!! Don KD8NNU On Sun, Jan 30, 2011 at 9:56 PM, Don Wilhelm wrote: > Don, > > You are doing it right - except -- > > Crank up either the K3 line-in gain or the computer audio line-out a > bit more - the proper setting is to have 4 "ALC" bars on solid and the > 5th one flickering. I put "ALC" in quotes, because the K3 ALC meter > is like a VU meter for the first 4 bars. The onset of ALC is > indicated by the 5th bar. > > 73, > Don W3FPR > > On 1/30/2011 9:45 PM, gold...@charter.net wrote: >> Finally I learned really dial in my output from the pc for the >> digital >> modes so that the ALC would be at a solid 3 bars and just tickel the >> 4th >> bar. In this condition I could go to 100w out and still have a clean >> signal. I was able to punch some dx at high power that i could not >> get >> at 50w or less. >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
