Calling on ST0R's freq happened to me a few times. Every time I would go and check another band, then come back to the original band where I had been calling, my split would be gone. I forgot to reset to split, and then would be calling on the wrong freq. Found that I had to go into the CONFIG / SPLT SV menu and set it to YES, then split would be saved. Of course now that I have it set this way, I will have to be careful when I qsy to a new band that split is not set when I don't want to be operating split.
73, Tim - N3XX ----- Original Message ----- From: "briana" <als...@nc.rr.com> To: <elecraft@mailman.qth.net> Sent: Sunday, July 31, 2011 6:18 AM Subject: Re: [Elecraft] Pileups and the KPA500 > I did hear a lot of K3's owners calling on the ST0R's frequency. > Perhaps the K3 needs to implement true one button split out of the box. > One shouldn't have to program bunches of function keys with little > sticky tags on the button/panel to get there. Besides there are not > enough buttons to program. > > 73 de Brian/K3KO ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html