Not a problem at all. Just a setting. Change made, and now when I make a quick check of another band, then come back to the original band, I am still split on the original band.
73, Tim - N3XX ----- Original Message ----- From: "Don Wilhelm" <w3...@embarqmail.com> To: "N3XX" <n...@charter.net> Cc: <elecraft@mailman.qth.net> Sent: Sunday, July 31, 2011 8:36 AM Subject: Re: [Elecraft] Pileups and the KPA500 >I don't see the problem, there is a large boxed indicator on the display >telling you the K3 is in SPLIT. Just take a quick look at the display when >changing bands. > > Of course, I know there are some who would like an automated hand to slap > us on the forehead and say in a loud voice "Dummy, you are in split". The > implementation of that device is left to the user. > > 73, > Don W3FPR > > On 7/31/2011 7:43 AM, N3XX wrote: >> Calling on ST0R's freq happened to me a few times. Every time I would go >> and check another band, then come back to the original band where I had >> been >> calling, my split would be gone. I forgot to reset to split, and then >> would >> be calling on the wrong freq. Found that I had to go into the CONFIG / >> SPLT >> SV menu and set it to YES, then split would be saved. >> Of course now that I have it set this way, I will have to be careful when >> I >> qsy to a new band that split is not set when I don't want to be operating >> split. >> >> 73, >> Tim - N3XX >> ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html