If you do not normally use the M1 thru M4 memory buttons, you can use them a pseudo band-stacking memories within each band. If you are tuned to a frequency that you may want to return to, tap V>M and then tap one of the M1-4 buttons - that frequency/mode/etc will be stored. To return, tap M>V and the button you stored into initially. Quick and easy once you get accustomed to it even though it is a 2 button operation. You can save up to 4 frequencies on any one band.
73, Don W3FPR On 10/29/2011 10:10 AM, Gary, W7TEA wrote: > I used an Omni VII for several years and while the receiver specs aren't up > to K3 standards, it had three features that I miss on the K3. > > Band stacking registers-four per band > Separate volume settings for Spot and Sidetone > An external heat sink so that fans are not necessary > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html