Yes, good point. I assumed when I should have been more specific. With the P3, I have the best of both worlds.
I 'presume' most K3's are adjusted from the factory per the manual with the pre-amp on, at -50 uV = S9. Rich, n0ce ----- Original Message ----- From: "Don Wilhelm" <w3...@embarqmail.com> To: <elecraft@mailman.qth.net> Sent: Tuesday, November 13, 2012 12:05 PM Subject: Re: [Elecraft] K3 sensitivity below 40 meters > The K3 S-meter can be calibrated with either the preamp on or off. I run > with SMTR MD set to ABS, and I calibrate the S-meter with the preamp > off because of that. > > 73, > Don W3FPR > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html