Jim,
I have used several cleaning/lubricating compounds on electrical
contacts with success over the years. The easiest is to use a light
coating of any light lubricant ( similar to 3 in 1 oil) on the male
pins. The insertion and removal of the contact surfaces in the presence
of the lubricant will wipe away corrosion at the mating points, and the
residual lubricant helps to discourage further oxidation.
I know I may take some flak from those who are hesitant to use anything
other than compounds recommended for electronics, but I have never
experienced any difficulties. Just apply the lubricant sparingly and
mate then disconnect the pins a few times for best results.
73,
Don W3FPR
On 6/17/2013 2:31 PM, makid...@gmail.com wrote:
Hi All
Elecraft Tech have advised to try cleaning the contacts in my K3 with Caig
Deoxit, problem is here in the UK it’s really really expensive, like it should
some in a solid gold tin!!!
So my question is will Servisol Super 10 be a good substitute for Caig Deoxit,
I know servisol has been used in service rooms for many many years for removing
tarnish and lubricating contacts
Whats your thoughts?
Looks like i’m in for a K3 strip, clean contacts and rebuild, shame these
contacts are such a weak point on such a great transceiver!!!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
