My P3 routinely forgets the per-band SPAN when I set it using software commands instead of P3 buttons. Doesn’t matter which band, and the SPAN is remembered properly if I press the corresponding FN button for the computer-set SPAN before I change bands.
My P3 also forgets the per-band REF LVL setting, but not always and only on 160m. Bill, K1GQ On Mar 15, 2014, at 13:16, Bill Hammond <wham...@aol.com> wrote: > As a CW operator, I keep the P3 in fixed track mode covering the lower 50 Khz > of each band. From time to time the P3 forgets the setting on the 17 and 12 > meter bands only. I'm wondering if i am the only person that has experienced > this issue. I can't pinpoint exactly how this happens but I am usually > operating on 10 meters when I change bands and discover 12 and 17 have had > the fixed track frequency I set disappear. > > I have never complained before as the reset has been infrequent. Now, with > 10 open, I find this problem occurs daily, sometimes two or three times a > day. Not an earth shattering problem as the P3 works fine and I change the > setting back, just an irritant. I'm wondering if it is just my station or > have others experienced this, remedy anyone? ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html