Well it's out of league. Are you sure the mode is either DATA A or FSK D? Sent from my iPhone ...nr4c. bill
> On Apr 17, 2014, at 10:41 PM, Bob KD7YZ <kd...@denstarfarm.us> wrote: > >> On 4/17/2014 18:08, Nr4c wrote: >> Except that 10 meters was mentioned my first check would be that the >> audio level is set wrong for digital modes. > > thanks for the input. > > I just verified that the ALC bars are as described. Line-In and so forth > are set ... > > But this wouldn't be band-specific would it? > > It's now not just ten meters. What I don't recall is the last time I > actually TRIED to run more than 5 to 10w on a digital mode, > > So here's the break-down: > 10,12,15,17,20 all toggle to near zero when the click is heard as power > on the K3 is increased from circa 11.8 thru 12w (when I hear a click and > the K3 HP 100 watt deck is activated). None of these will put out more > than 6 to 8 watts despite what the RF power says it thinks the K3 is doing. > > 40,60,80,160 all will transmit 1 through 100w on TX-Data through the > soundcard. > > On CW, 160 thru 10m will xmit 100w . > > the number of ALC bars is fairly constant through the bands, in Tx-Data > mode, when sending via the Soundcard. > > > > > -- > > Bob KD7YZ > AMSAT LM 0901 > http://www.qrz.com/db/KD7YZ > www.denstarfarm.us/LGD ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com