Yes you can use it one of two ways... in TCP mode, there is a small driver loaded on your PC that creates a pseudo RS232 port on the computer that all your existing software connects to. Your software thinks it's talking to your radio via RS232... but really that is an emulation that gets ported over the Ethernet to the radio (where the Ethernet to RS232 server is) and deconstructed into RS232 (RXD and TXD) with DTR and RTS for keying. Your computer can be right next to your radio or half way around the world and the radio will never know the difference. Latency is not a problem.
Second mode is WEB server where the radio is emulated in web pages in the onboard web server (eg web page looks like the radio). You can change any parameter in the setup or knob on the radio that you could via RS232. No security is provided. Nor is there with the FLEX, Ten-tec, or any other radio that has an Ethernet connection currently. I just use a Netgear firewall and VPN through it securely. Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ Owner - Operator Big Signal Ranch – K9ZC Staunton, Illinois Owner – Operator Villa Grand Piton – J68HZ Soufriere, St. Lucia W.I. Rent it: www.VillaGrandPiton.com email: b...@wjschmidt.com -----Original Message----- From: Pierfrancesco Caci [mailto:p...@tippete.net] Sent: Monday, July 20, 2015 12:35 AM To: b...@wjschmidt.com; 'Paul Christensen'; elecraft@mailman.qth.net Subject: Re: [Elecraft] K3/K3s Ethernet Interface On 19 July 2015 23:40:51 CEST, "Dr. William J. Schmidt, II" <b...@wjschmidt.com> wrote: >I have a prototype Ethernet interface running inside my K3 right now... >simple replacement for the KIO3 board. I posted a couple of times >suggesting it but was completely ignored so I build my own. It's just >a pic >with Ethernet capabilities and replaces the functions of the KIO3 >completely >and more. It will be available commercially soon... > > >Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ >PJ2/K9HZ > >Owner - Operator >Big Signal Ranch - K9ZC >Staunton, Illinois > >Owner - Operator >Villa Grand Piton - J68HZ >Soufriere, St. Lucia W.I. >Rent it: www.VillaGrandPiton.com > >email: b...@wjschmidt.com > >-----Original Message----- >From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of >Paul >Christensen >Sent: Sunday, July 19, 2015 2:24 PM >To: elecraft@mailman.qth.net >Subject: [Elecraft] K3/K3s Ethernet Interface > >This inquiry is directed to both the Elecraft leadership team as well >as >K3/K3s owners who may have an interest in native Ethernet connectivity. > In >searching through the list archives, I noted that some K3 owners had >previously expressed an interest in an Ethernet option - and some >owners >have been disappointed that the new K3s and KIO3B board does not >include >Ethernet connectivity. > > > >A bit of background: for the past few months, N4CC and I have been >operating >a remote Internet station that's located near the FL/GA state line. >Our >setup includes a K3 and RemoteRig at the remote site and either a K3 or >K3-mini at the control locations. Since the installation, we've >experienced >almost no operating trouble and any issues that have developed are >managed >remotely though direct and back-door network access points. > > > >Last week, I made some internal changes to the K3 and also added an >external USB data interface device for RTTY. What's apparent is that >cable >management is getting way out of control. To gain inside access to the >K3 >almost requires a meditation exercise before going in. Consider that a >PR6 >is mounted to the back of the K3. The rear of the K3 is an absolute >rat's >nest of cabling. With the RemoteRig and PR6, It was bad enough before >the >inclusion of the external USB sound car/interface, but now it's >bordering on >ridiculous. Moreover, RemoteRig does not allow clean access to the >K3's >ACC DB-15 connector for other purposes such as FSK keying. Sure, the >connector can be opened to access pins, but it requires a wiring >break-out, >leading to yet a further rat's nest of cabling. > > > >To help deal with the cabling issues, I am replacing the external PR6 >with >the new KXVB3 board. Next, a KIO3B board will be added when it's >available >to existing K3 owners. That should eliminate the external sound card >interface and clear up much of the cabling mess, but not all of it. > > > >The Holy Grail is an Ethernet interface that includes (optional) >integrated >RemoteRig hardware - just one interface board [e.g., KIO3E(thernet) >board] >that manages K3 Ethernet connectivity with or without RemoteRig >attributes. >Don't need Ethernet? Then don't get the board. Since the RemoteRig >hardware >is mature and consumes little circuit board space and DC current, >perhaps it >would be worth opening up a discussion with RemoteRig's designer since >Elecraft already has a close relationship with Microbit. I know rear >panel real estate is a concern, so it won't be easy to add yet another >connector without adversely affecting other connectivity. Thoughts? > > > > >Paul, W9AC > > > > > > > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:Elecraft@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html >Message delivered to b...@wjschmidt.com > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:Elecraft@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html >Message delivered to p...@tippete.net William, What does it need on the control computer side? Will it be totally transparent to existing applications, k3util, fldigi, hamlib and so on? Does it require a specific operating system? Does it supports firmware uploads to the radio? Pf -- Pierfrancesco Caci ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
