First of all, it is POWDER coating not POWER coating. Secondly you can get conductive POWDER coating material.
Unusual to find such and many people do not like to use it. George, W6GF Sent from my iPad > On Oct 29, 2015, at 4:49 PM, Bob McGraw - K4TAX <rmcg...@blomand.net> wrote: > > It is amazing how many times I've found this to exist and how many times that > I've written about this on various reflectors. The power coat paint on the > chassis makes for an excellent insulator. > > If you have an Astron power supply and you have not checked to see that third > pin ground is electrically connected to the chassis, or you have not checked > to see that he outer shell is connected to the bottom shell, both being > insulated by paint..........shame on you. > > This applies to all Aston supplies, both linear and switching. Remove the > cover, remove the ground terminal where the green wire is attached, scrape > away the paint, place an internal tooth lock washer between the terminal and > chassis and reinstall the screw and nut. As to the shell, using 100# > sandpaper, sand away the paint on the inside for an area about the size of a > dime on both pieces, being the shell and pan, where the screws attach same. > > 73 > Bob, K4TAX > >> On 10/29/2015 4:25 PM, Jim Brown wrote: >>> On Thu,10/29/2015 2:13 PM, Fred Jensen wrote: >>> The intermittent problem turned out to be paint under a lug with a loose >>> screw. >> >> That seems to be a very common problem with Astrons -- the power system >> "green wire" (safety ground) is soldered to the mounting lug of a terminal >> strip, which is insulated from the chassis by paint. This is a MAJOR >> violation of NEC. To make matters worse, the V- terminal is soldered to the >> same lug. The combination makes the unit susceptible to RFI. >> >> In one of my Astrons, the two sections of the chassis are insulated from >> each other by paint, so the unit is essentially unshielded as well. >> >> I do NOT recommend bonding V- to the chassis, so when you're fixing the >> paint problems, cut that jumper. There's no good reason for it. >> >> 73, Jim K9YC > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to georgefrit...@yahoo.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
