Clay,
I would give up so many filter leaving only both stock SSB in both RX and
adding 400Hz CW for the main RX.
If you are into contesting or DXing I would rather swap hand mike for Heil
IC headset.
If you are into Digi I would order KTCXO3
All the rest can be added later.
73, Igor UA9CDC
----- Original Message -----
From: "Clay Autery" <caut...@montac.com>
To: <elecraft@mailman.qth.net>
Sent: Friday, January 29, 2016 12:04 AM
Subject: [Elecraft] Need a second set of eyes... WAS: Re: Price Increase
Alert for Feb 4th.
OK... so I don't have time to complete my stack of cash for my K-Line
order... I've paired it back. Anyone interested in offering me a
second pair of eyes to see if I am making any glaring mistakes in
spec'ing out my reduced order?
Here's a link to a screen shot of my shopping cart:
*http://www.montac.com/pics/Elecraft_Draft_Order.jpg
*
Here's the Executive summary:
K3S/100K Transceiver with 100 Watt amp module
KRX3A-K Secondary Receiver
KAT3A-K Internal Antenna tuner
MH-2 Hand Mic
SS30DV Power Supply
And here's the filters I am going to end up with:
FL1 - Reserved for FM/Reserved for FM
FL2 - KFL3A-6K/KFL3A-6K (AM/eSSB)
FL3 - KFL3A-2.8_2.7sw/KFL3A-2.8_2.7sw (trade-up to 2.8kHz/8-pole on
both receivers)
FL4 - KFL3A-400/KFL3A-400 (CW... yes, this "no-code" is diligently
working to achieve 25wpm before the end of summer)
FL5 - KFL3A-250/KFL3A-250 (CW)
Lot's of other stuff I'd LIKE to have, but just can't do it. Anyone
think I should do anything different? I'm kind of capped right around
this total.
Thanks
______________________
Clay Autery
MONTAC Enterprises
(318) 518-1389
On 1/27/2016 5:02 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
Early alert for our Elecraft list readers:
We're finally implementing the planned price changes that we first
mentioned late last year. We ended up delaying that change due to both
the large holiday season order rush and several ham shows, both of
which always generate a lot of sales sales activity and keep our sales
team very busy.
As noted before, our costs are going up as our vendors increase their
prices to us and our labor costs also increase. (Its a never ending
battle to keep costs down as economic activity has picked up the last
two years.) We've been absorbing all of these increases, but now we
have hit the point where we must increase prices slightly on a number
of our products.
The prices will change on next Thursday, Feb. 4th. Our on-line order
forms will update with the new pricing at that time.
Please resist the urge to call or email our sales / support people
about which specific products will be changing or how much the changes
will be, as they do not have this information. (We're still in the
middle getting everything entered.)
Of course, all orders received -prior- to the Feb 4th increase will be
charged at the lower pre-increase pricing when they ship.
73,
Eric
/elecraft.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ua9...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
