Jimmy,
I do *not* recommend using styrofoam. It can generate a lot of static.
If you have some of the black anti-static foam, that is OK.
With the K3S, there are no leaded parts, so there are no leads to stick
into the block anyway.
73,
Don W3FPR
On 8/6/2016 9:56 AM, James Walker wrote:
Has anyone mentioned the styrofoam method? I’ve always saved a good chunk of
styrofoam from an appliance purchase to be used to stick parts in. It works
super for capacitors, resistors and similarly shaped parts. It’s a bit tedious
to put the parts into the foam block one by one, but it makes identifying and
selecting them for installation so much easier during kit construction. Also,
they don’t fall out easily.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com