Well, I don't use "zip wire" for anything anymore... But if you want a good selection of wire at reasonable prices, and great quality...
http://wesbellwireandcable.com/index.html I've bought by the foot and by the spool from these folks. Tell Matt I sent you. :) I suggest using 10 GA THHN/THWN wire in red and black.... then HAND twist it and terminate it with your Powerpole on one end and the lug terms or whatever you want on the other end. Use heatshrink or zip-ties to keep twists (not necessary for cables with PP on both ends... BTW, WesBell has heatshrink too... 73, ______________________ Clay Autery, KY5Gt MONTAC Enterprises (318) 518-1389 On 8/11/2016 10:21 AM, rick jones via Elecraft wrote: > I just bought 20' of what was supposed to be 10GA zip wire from that auction > site. It is clearly marked as "Audiopipe 10 Gauge speaker cable". The > conductor is actually 12GA at best. Is this becoming common practice or is > wire going the way of 2X4 lumber? Suggestions for a reputable source of true > 10GA PTFE zip wire for K3 power? > ______________________________________________________________ > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
