In my experience, NR is much better than NB against power line noise. However, NR does not work on DATA mode. I use BHI Compact In-line DSP Noise Eliminating Module, which is inserted between K3 line out and USB audio module.
For effectively eliminating noise, tuning RF gain and AGC level in addition to NB and/or NR would give you better results. de JH3SIF, Keith > 2017/09/04 4:38、Wes Stewart <wes_n...@triconet.org> のメール： > > I agree. The adjustments are far too many and arcane. I'm currently plagued > with powerline noise that has yet to be fixed, although they are supposed to > be working on it. The K3S blanker is slightly better than useless. When I set > it aggressive enough to be audibly useful, FT8 decodes multiple signals at > 120 Hz intervals, which upsets sequencing. > > I'm finding that my SDR-IQ that I normally use only as a bandscope, has > better noise blanking on its demodulated audio than the K3. Too bad I can't > use it with WSJT-X. > > I suspect, but do not know for sure, (maybe the designer can enlighten us) > that there is insufficient delay in the (analog) signal path and the noise > gets through before blanking takes place. > > Wes N7WS > > > > On 9/3/2017 9:18 AM, K9MA wrote: >> I have never found the K3 noise blanker to be effective. On the other hand, >> in side-by-side comparisons, the noise blanker in my old FT-1000D can be >> very effective on my ever present power line noise. However, like all noise >> blankers of that design, it only works if there are no strong signals within >> many kHz of the operating frequency, so it's completely useless on a crowded >> band. The only way around this I know of is to use a second receiver, tuned >> to a clear spot nearby, to control the noise blanker. >> >> BTW, the K3 noise blanker uses a filter with a bandwidth of about 100 kHz. >> The idea is that, in such a wide bandwidth, the amplitude of the noise >> pulses should be large, making them easier to distinguish from signals. >> (The FT-1000 uses something like 15 kHz.) However, I've never been able to >> get the K3 NB to work, even on a completely dead band. Under the same >> conditions, I can often get a 20 dB reduction with the other radio. That I >> don't understand. I should investigate that sometime. >> >> 73, >> >> Scott K9MA >> >> ---------- >> >> Scott Ellington >> >> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to jh3...@sumaq.jp ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
