You could be right.  I'm out of town right now so I can't check it.  But
I think I remember that in some of the digital modes the definition of
VFO A frequency is different. 

Alan N1AL 

On 2019-07-23 11:36, Joe Subich, W4TV wrote:

> On 2019-07-23 12:47 PM, Alan Bloom wrote: 
> 
>> Also be aware that the center frequency differs depending on mode.
> 
> The P3 *should be able to account for that* by using the FI get:
> 
>> FI * (I.F. Center Frequency; GET only)
>> RSP format: Finnnn; where nnnn represents the last 4 digits of the K3's 
>> present I.F. center frequency in Hz.  Example: If nnnn = 5000, the I.F. 
>> center frequency is 8215000 Hz.  Intended for use with panadapters, which 
>> need to keep track of the exact I.F. center frequency as filter bandwidths 
>> and shifts are changed by the
>> operator.
> 
> 73,
> 
> ... Joe, W4TV
> 
> On 2019-07-23 12:47 PM, Alan Bloom wrote: 
> 
>> Good advice.
>> 
>> Also be aware that the center frequency differs depending on mode.  For
>> example, it is the supressed carrier frequency on SSB but is offset by
>> typically 600 Hz on CW.
>> 
>> I like to use AM mode for frequeny calibration.  After doing a frequency
>> calibration on the K3, tune to a signal on the AM broadcast band and
>> adjust the P3 frequency calibration.  (MENU:RefCal.  Cal procedurre is
>> on page 39 of the manual)  As I recall, AM broadcast stations are
>> required to be within 20 Hz of nominal frequency but are typically much
>> closer than that.
>> 
>> Alan N1AL
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to a...@elecraft.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Reply via email to