A good, known accurate DVM is an asset to any station.  Use it to determine if 
the others are accurate.  There are several good brands available.   A DVM that 
is not accurate is worse than no DVM at all.   

My choice of many years ago is my Fluke 77.   After I tapped it with too much 
voltage, I sent it to Fluke for repair and calibration.  I am confident when I 
make a measurement it is accurate without question. 

Bob, K4TAX


Sent from my iPhone

> On Dec 23, 2019, at 2:12 PM, Buck <radiok...@gmail.com> wrote:
> 
> The reliable place to measure the voltage at the K3x is using the supply 
> voltage display meter in the radio.  I was surprised to find mine was 
> significantly low.  I thought it was voltage drop but changing the supply 
> cable didn't make much difference.
> 
> Turns out the Astron power supply was more than a volt low and the meter on 
> the supply had been cranked up to make it appear to be correct.  I used two 
> separate VOMs to set the power supply and then adjusted the meter to make it 
> agree.
> 
> Moral of the story: don't rely on the meter on the power supply and assume a 
> low reading at the radio is due solely to voltage drop.
> 
> 
> 
> Buck, k4ia
> Honor Roll
> 8BDXCC
> EasyWayHamBooks.com
> 
>> On 12/23/2019 2:26 PM, Phil Kane wrote:
>>> On 12/22/2019 9:44 AM, Bob McGraw wrote:
>>> I also added a dedicated ground between the ground screw on the back of
>>> the radio to the ground screw on the power supply.
>> That's for "bonding".  Where do you pick up "ground" - at the radio, at
>> the PS, or at some other point?
>> 73 de K2ASP - Phil Kane
>> Elecraft K2/100   s/n 5402
>> From a Clearing in the Silicon Forest
>> Beaverton (Washington County) Oregon
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to radiok...@gmail.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcg...@blomand.net 


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Reply via email to