Yes, you can - just as you do with your Orion. Sometimes I open it up to 1500 Hz or so in CW mode when I'm tuning around the band.
Bob NW8L On Sun, Apr 20, 2008 at 4:39 PM, John Unger <[EMAIL PROTECTED]> wrote: > I'm still waiting for my K3, but... > > I guess from the fact that you went through these gyrations means that one > can't simply set the roofing filtering selection on "auto" and dial in a DSP > width of 2700 Hz., e.g., or whatever with a K3 and have the 2700 Hz. SSB > filter as the roofing filter; like I can with my Orion? > > What am I missing? > > > 73 - John, W4AU > > > > At 04:56 PM 4/20/2008, you wrote: > > > > > > > > > I tried something last night that may be of interest to some CW ops. > Although most of us are always in search of ways to narrow CW bandwidth, > there are times when listening to CW is made more enjoyable when the > receiver is allowed to open up a bit, especially with AFX activated. > > > > In order to engage in wideband CW reception with the wider crystal and DSP > filters, press SPLIT, then A=>B. Set VFO A for either LSB or USB. Then, > set VFO B to CW. Next, press and hold the SUB button to link VFO A with VFO > B. The CW offset can be made to match the sidetone frequency by setting VFO > A and B to slightly different frequencies (difference being the side-tone > frequency). I stored my settings into memory so I don't have to go through > all the gyrations next time. With this approach, the rig is transmitting CW > on VFO B, but listening in either LSB or USB on VFO A. > > > > It's important to set the Rx frequency on VFO A up by the offset amount > (e.g., 600 Hz) for CW LSB receive, and down by the offset amount for CW USB > receive. My tests show that QSK performance remains super-fast and is not > affected with this procedure. > > > > Paul > > _______________________________________________ > > Elecraft mailing list > > Post to: Elecraft@mailman.qth.net > > You must be a subscriber to post to the list. > > Subscriber Info (Addr. Change, sub, unsub etc.): > > http://mailman.qth.net/mailman/listinfo/elecraft > > > > Help: http://mailman.qth.net/subscribers.htm > > Elecraft web page: http://www.elecraft.com > > > > > > -- > > No virus found in this incoming message. > > Checked by AVG. Version: 7.5.524 / Virus Database: 269.23.2/1387 - Release > Date: 4/19/2008 11:31 AM > > > > > _______________________________________________ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com