> > In fact, just pressing SPLIT should get you to the same > > condition as two A-B taps and pressing SPLIT. > > While cross-mode QSOs are not as common on HF as they are on > 6 meters, such an implementation would make them extremely > difficult.
The CW in SSB feature makes cross mode QSOs no different than a SSB QSO. It is no problem to narrow the filters in SSB if necessary - even to the point of using a 500 Hz 1st IF filter as long as it is enabled in SSB. If a user insists on setting VFO B to a different mode, "B Set, Mode, B Set" is certainly adequate to "undo" any mode change caused by A -> B. 73, ... Joe, W4TV > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Lyle Johnson > Sent: Friday, September 12, 2008 9:57 AM > To: Elecraft@mailman.qth.net > Subject: Re: [Elecraft] Illogical coding > > > > In fact, just pressing SPLIT should get you to the same > condition as > > two > > A-B taps and pressing SPLIT. > > While cross-mode QSOs are not as common on HF as they are on > 6 meters, > such an implementation would make them extremely difficult. > > The K3 is a complex radio and has its own personality. After > you spend > some time with it, you'll probably get to know it quite well. > > > I really hope Elecraft will fix this some day. > > The changes came about as a result of careful deliberation based on > input from customers, followed by field testing and > evaluation of that > feedback. > > We're listening! > > 73, > > Lyle KK7P > > _______________________________________________ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com