Ed Muns wrote: >> During the NAQP RTTY, at one point I was calling a solid >> stream of CQ's at 100 watts output on RTTY and not getting >> any replies. I was watching the PA Temp, and it climbed up to >> 65C and looked like it wanted to keep rising pretty quickly. >> I think hi temp shutdown is at 84C. I backed off on my CQ's >> and used the other radio for a while. I had the fan speed >> locked on step 4. All of this was at 13.8VDC. With any kind >> of heavy duty usage, I don't think cranking up the voltage is >> a good idea. A better idea is to buy an AL-1500 or similar >> low drive amp, which will give you 1500 watts out with 50 >> watts of drive. NOW, we are talking "juice." ;) > > This is interesting. I run 100 watts output on RTTY, CQing and working > stations at a continual flow, and the fans hardly run at all. The PA > temperature stays down. I wonder if there is something unique going on with > your K3(s)? One user found a fan wire impeding the blades of one of his > fans and even on CW, he had the same experience described above.
Ditto - I ran two K3s at 100W for the NAQP RTTY contest a couple of weeks ago, and was (pleasantly) surprised by how cool they remained. ~Iain / N6ML ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html