Is there anything else I need to do? All I get is LINUXCNC - 2.6.0~pre Machine configuration directory is '/home/samco/linuxcnc/configs/circblend/axis' Machine configuration file is 'axis.ini' Starting LinuxCNC... io started halcmd loadusr io started task pid=6589 emcTaskInit: using builtin interpreter Shutting down and cleaning up LinuxCNC... Cleanup done
doing (in linuxcnc project folder) cd tests/trajectory-planner/circular-arcs ./build-debug.sh Then run linuxcnc: linuxcnc (config file optional) > test.log thanks sam On Wed, 4 Dec 2013 16:19:21 -0500 Robert Ellenberg <[email protected]> wrote: > I see what you mean, that's not a simple violation, that looks like a > divide by zero or uninitialized data. Does this happen consistently at that > point? If so, can you run it in "debug" mode as I described? It would be > helpful to see the internal state to pinpoint when this happens. There's a > quick way to do this in the latest commit: > > (in linuxcnc project folder) > cd tests/trajectory-planner/circular-arcs > ./build-debug.sh > > Then run linuxcnc: > linuxcnc (config file optional) > test.log > > If you can send me test.log, it will help find the source of the error. > > Thanks! > Rob > > > On Wed, Dec 4, 2013 at 3:23 PM, sam sokolik <[email protected]> wrote: > > > the position/accelleration jump. Like > > > > http://imagebin.org/279547 (there is no recovering from that - and the > > position.txt file needs to be deleted before the next run) > > > > sam > > > > > > > > On 12/4/2013 2:15 PM, Robert Ellenberg wrote: > > > I'll run those programs on my Pc's and see if I can reproduce the > > > violation. Was it a crash as in a segfault, or just an acceleration > > > violation? > > > > > > I also had tcqPut fail once as well, which halted the program. I'll need > > to > > > look into that a bit more. I've only seen it once, but it could be an > > > expensive error for a long program, if it stops 90% of the way through. > > > > > > Rob > > > > > ------------------------------------------------------------------------------ > > > Sponsored by Intel(R) XDK > > > Develop, test and display web and hybrid apps with a single code base. > > > Download it for free now! > > > > > http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk > > > _______________________________________________ > > > Emc-developers mailing list > > > [email protected] > > > https://lists.sourceforge.net/lists/listinfo/emc-developers > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > Sponsored by Intel(R) XDK > > Develop, test and display web and hybrid apps with a single code base. > > Download it for free now! > > > > http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk > > _______________________________________________ > > Emc-developers mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-developers > > > ------------------------------------------------------------------------------ > Sponsored by Intel(R) XDK > Develop, test and display web and hybrid apps with a single code base. > Download it for free now! > http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers ------------------------------------------------------------------------------ Sponsored by Intel(R) XDK Develop, test and display web and hybrid apps with a single code base. Download it for free now! http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
