Here is a short program that shows it in the realtime build http://electronicsam.com/images/KandT/testing/circrttest/stellabee1rt.ngc Around line 57
http://electronicsam.com/images/KandT/testing/circrttest/Screenshot-39.png Either I am doing something wrong or logging doesn't seem to work with the realtime builds. sam On 12/5/2013 12:13 PM, sam sokolik wrote: > Ok - Sim errors in the same spot each time. I made a shorter program > that shows it > > This program > http://electronicsam.com/images/KandT/testing/circsimtest/stellabee1sim.ngc > causes this > http://electronicsam.com/images/KandT/testing/circsimtest/Screenshot-38.png > around line 131 > > here is the log > http://electronicsam.com/images/KandT/testing/circsimtest/test2.log > > I will to the realtime one next > sam > > > > > > On 12/5/2013 10:59 AM, sam sokolik wrote: >> I pulled the latest this morning from your repository. (I think you may >> have made a few changes this week) this build seems to fails in a >> different spot. >> >> I built sim and a realtime version of this mornings pull (logging seems >> to only work with sim builds) >> >> The sim runs stellabee to around line 56220 before there is a constraint >> violation. >> >> http://imagebin.org/280705 >> >> but it doesn't go too wacky - and seems to recover. Here is the log >> file - (1gb - I didn't want to strip any of it. - I caught it not to >> far after it failed - so it should be towards the end) >> >> http://electronicsam.com/images/KandT/testing/test2.log (it is >> uploading now) >> >> the bad news is that the realtime run seems to fail at a different >> spot. (close - but different 50940) >> >> http://imagebin.org/280711 >> >> I am going to run them again to see if it is consistant >> >> sam >> >> >> >> >> >> >> >> >> On 12/5/2013 8:03 AM, Robert Ellenberg wrote: >>> Sorry, I wasn't clear on that last part. Instead of (configuration file >>> optional), put the path to your configuration file: >>> >>> For example: >>> >>> linuxcnc ~/linuxcnc-dev/configs/sim/axis/axis.ini > test.log >>> >>> Rob >>> ------------------------------------------------------------------------------ >>> Sponsored by Intel(R) XDK >>> Develop, test and display web and hybrid apps with a single code base. >>> Download it for free now! >>> http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk >>> _______________________________________________ >>> Emc-developers mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/emc-developers >>> >>> >> ------------------------------------------------------------------------------ >> Sponsored by Intel(R) XDK >> Develop, test and display web and hybrid apps with a single code base. >> Download it for free now! >> http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk >> _______________________________________________ >> Emc-developers mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-developers >> >> > > ------------------------------------------------------------------------------ > Sponsored by Intel(R) XDK > Develop, test and display web and hybrid apps with a single code base. > Download it for free now! > http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers > > ------------------------------------------------------------------------------ Sponsored by Intel(R) XDK Develop, test and display web and hybrid apps with a single code base. Download it for free now! http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
