I pulled the latest this morning from your repository. (I think you may have made a few changes this week) this build seems to fails in a different spot.
I built sim and a realtime version of this mornings pull (logging seems to only work with sim builds) The sim runs stellabee to around line 56220 before there is a constraint violation. http://imagebin.org/280705 but it doesn't go too wacky - and seems to recover. Here is the log file - (1gb - I didn't want to strip any of it. - I caught it not to far after it failed - so it should be towards the end) http://electronicsam.com/images/KandT/testing/test2.log (it is uploading now) the bad news is that the realtime run seems to fail at a different spot. (close - but different 50940) http://imagebin.org/280711 I am going to run them again to see if it is consistant sam On 12/5/2013 8:03 AM, Robert Ellenberg wrote: > Sorry, I wasn't clear on that last part. Instead of (configuration file > optional), put the path to your configuration file: > > For example: > > linuxcnc ~/linuxcnc-dev/configs/sim/axis/axis.ini > test.log > > Rob > ------------------------------------------------------------------------------ > Sponsored by Intel(R) XDK > Develop, test and display web and hybrid apps with a single code base. > Download it for free now! > http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers > > ------------------------------------------------------------------------------ Sponsored by Intel(R) XDK Develop, test and display web and hybrid apps with a single code base. Download it for free now! http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
