Gotcha, thanks for the link, I emailed u a response a min ago
> From: [email protected] > Date: Sun, 9 Mar 2014 21:19:59 +0000 > To: [email protected] > Subject: Re: [Emc-developers] Tree VMC tool changer help > > On 9 March 2014 21:14, Michael Chism <[email protected]> wrote: > > I am pretty familiar with g-code but linking the the hal input motion pin > > from the 7i77 is my challenge, do you have an example? > > Something in the HAL file (I would be tempted to use a separate HAL > file for the toolchanger) > > net you-can-use-any-name-that-describes-the-sensor > hm2_5i25.0.7i77.00.digital-in-00 => motion.digital-in-00 > > > What was the L and Q standfor in your small code? > > http://www.linuxcnc.org/docs/html/gcode/m-code.html#sec:M62-M65 > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > ------------------------------------------------------------------------------ > Subversion Kills Productivity. Get off Subversion & Make the Move to Perforce. > With Perforce, you get hassle-free workflows. Merge that actually works. > Faster operations. Version large binaries. Built-in WAN optimization and the > freedom to use Git, Perforce or both. Make the move to Perforce. > http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers ------------------------------------------------------------------------------ Subversion Kills Productivity. Get off Subversion & Make the Move to Perforce. With Perforce, you get hassle-free workflows. Merge that actually works. Faster operations. Version large binaries. Built-in WAN optimization and the freedom to use Git, Perforce or both. Make the move to Perforce. http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
