On Sunday 17 January 2021 19:05:01 andy pugh wrote: > On Sun, 17 Jan 2021 at 23:49, Gene Heskett <ghesk...@shentel.net> wrote: > > Andy, I have a working 4.19 kernel. Runs on a pi3b or pi4b. > > But does it run on the new Pi4?
That I don't know, if the hardware has been changed from the 2gig rpi4b I bought last spring. This hardware and kernel has the new video drivers, replacing the glacial framebuffers the rpi3 had. Raspian, if asked nicely, has the srcs for a preempt-rt kernel, but you are 100% on your own to build and install it. That is what I started with but I've seriously stripped it to stop wasting time building stuff for all the other arm family kissing cousins. > The 4.19 kernel on the LinuxCNC server works perfectly well on _my_ > Pi4 and on the Pi400 that I bought for testing when this issue was > first reported. pi400? never heard of it. > But there has been a hardware change, to at least the USB subsystem, > and possibly to other features too. URL to buy one, maybe more? Found it, too much usefull i/o has disappeared, so I'm not that interested. I am using all 4 usb jacks + spi at 40 megabit write and 25 megabit reads, but I suspect that would crash and burn at much lower speeds with a cable to a 7i90 much longer than the inch I'm using. And I'm not willing to dedicate the only wired ethernet port to a 7c80. As for odroid-h2, I have a c2 I put over $100 worth of my SS into at the time, bricked, trying to install linux thru a UEFI bios that had no mandatory off switch. Odroid had zero sympathy. rpi's so far are not afflicted with that microsoft disease. Odroid is therefore not on my vendor list. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers