On 27.01.22 14:31, gene heskett wrote:
On Tuesday, January 25, 2022 8:27:27 PM EST gene heskett wrote:
Greetings all;
I built a fresh pull of master earlier today, which makes installable
debs. I normally run this shell script to install them, and on buster
it Just Works.
But, now I have succeeded in getting a raspios bullseye to run on a
5.16.2-rt19-rt19-v7l+ #3 SMP PREEMPT_RT kernel, and that first boot
updated about 2gigs of stuff. There is about 130 pkgs to update.
And I've found a solution to the no net on boot problem applicable to
home networks that are hosts file based. If you while the card is still
mounted in a reader, edit the /etc/dhcpdcp.conf file, you will find a
place at the bottom that is commented out but you can uncomment it and
fill in the data to fit your setup, and when booted in the pi, just
works, you have a network from the gitgo. Thats one MAJOR headache out
of the way.
BUT, what I built on buster, will not install on bullseye as too much
has been version advanced. I have installed about a gig of stuff dpkg
complains about but have not been able to get a working install.
yet...
The remaining errors are:
dpkg: dependency problems prevent configuration of linuxcnc-uspace:
linuxcnc-uspace depends on libboost-python1.67.0; however:
Package libboost-python1.67.0 is not installed.
linuxcnc-uspace depends on libpython3.7 (>= 3.7.0); however:
Package libpython3.7 is not installed.
linuxcnc-uspace depends on python3 (<< 3.8); however:
Version of python3 on system is 3.9.2-3.
linuxcnc-uspace depends on python3.7-tk; however:
Package python3.7-tk is not installed.
linuxcnc-uspace depends on python3.7-numpy | python-numpy; however:
Package python3.7-numpy is not installed.
Package python-numpy is not installed.
But newer versions of all the above are all installed.
I do not know at this stage if I have enough to rebuild them as yet.
The debhelper suite is not yet installed.
So I need to see the /e/a/sources.list.d/linuxcnc.list file for
bullseye so I can see if those .debs will install.
Thanks guys, take care and stay well everybody.
Cheers, Gene Heskett.
addendum: I've now installed quite a few more pkgs it needs to build on
bullseye, but have hit a real showstopper. "convert" is completely
missing from the bullseye repos and configure is bailing out. There are
also quite a few squawks about python stuff that isn't quite right but
the missing convert is the current showstopper. Its also fussing about
missing rtai stuff, like it may be missconfigured or an ENV thing is
wrong, uspace does not supposedly depend on rtai when running on a
preempt-rt kernel. But I'm not THAT expert so IDK.
What do I/we do about the missing convert?
In my previous response I was informing you that your cron job
substitutes the master branch that you have checked out first with
another branch that is 7 months old by subsequently checking out that
gtk3 variant.
The paragraph above does not direct me to anything that I could possibly
use to learn if you have fixed the one thing that is for sure messing
everything up and explains the error messages that you have still in
this email.
Remote debugging with incomplete information is a bit difficult, as we
just cannot see what you can see. I suggest you build everything in a
new directory with a different name that is not interfered with by
background processes.
Thumbs pressed, other fingers crossed
Steffen
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
