On Thursday, January 27, 2022 8:49:30 AM EST Steffen Möller wrote: > On 27.01.22 14:31, gene heskett wrote: > > On Tuesday, January 25, 2022 8:27:27 PM EST gene heskett wrote: > >> Greetings all; > >> > >> I built a fresh pull of master earlier today, which makes > >> installable > >> debs. I normally run this shell script to install them, and on > >> buster > >> it Just Works. > >> > >> But, now I have succeeded in getting a raspios bullseye to run on a > >> 5.16.2-rt19-rt19-v7l+ #3 SMP PREEMPT_RT kernel, and that first boot > >> updated about 2gigs of stuff. There is about 130 pkgs to update. > >> > >> And I've found a solution to the no net on boot problem applicable > >> to > >> home networks that are hosts file based. If you while the card is > >> still mounted in a reader, edit the /etc/dhcpdcp.conf file, you > >> will find a place at the bottom that is commented out but you can > >> uncomment it and fill in the data to fit your setup, and when > >> booted in the pi, just works, you have a network from the gitgo. > >> Thats one MAJOR headache out of the way. > >> > >> BUT, what I built on buster, will not install on bullseye as too > >> much > >> has been version advanced. I have installed about a gig of stuff > >> dpkg > >> complains about but have not been able to get a working install. > >> yet... > >> > >> The remaining errors are: > >> > >> dpkg: dependency problems prevent configuration of linuxcnc-uspace: > >> linuxcnc-uspace depends on libboost-python1.67.0; however: > >> Package libboost-python1.67.0 is not installed. > >> > >> linuxcnc-uspace depends on libpython3.7 (>= 3.7.0); however: > >> Package libpython3.7 is not installed. > >> > >> linuxcnc-uspace depends on python3 (<< 3.8); however: > >> Version of python3 on system is 3.9.2-3. > >> > >> linuxcnc-uspace depends on python3.7-tk; however: > >> Package python3.7-tk is not installed. > >> > >> linuxcnc-uspace depends on python3.7-numpy | python-numpy; however: > >> Package python3.7-numpy is not installed. > >> Package python-numpy is not installed. > >> > >> But newer versions of all the above are all installed. > >> I do not know at this stage if I have enough to rebuild them as yet. > >> The debhelper suite is not yet installed. > >> > >> So I need to see the /e/a/sources.list.d/linuxcnc.list file for > >> bullseye so I can see if those .debs will install. > >> > >> Thanks guys, take care and stay well everybody. > >> > >> Cheers, Gene Heskett. > > > > addendum: I've now installed quite a few more pkgs it needs to build > > on bullseye, but have hit a real showstopper. "convert" is > > completely missing from the bullseye repos and configure is bailing > > out. There are also quite a few squawks about python stuff that > > isn't quite right but the missing convert is the current > > showstopper. Its also fussing about missing rtai stuff, like it may > > be missconfigured or an ENV thing is wrong, uspace does not > > supposedly depend on rtai when running on a preempt-rt kernel. But > > I'm not THAT expert so IDK. > > > > What do I/we do about the missing convert? > > In my previous response I was informing you that your cron job > substitutes the master branch that you have checked out first with > another branch that is 7 months old by subsequently checking out that > gtk3 variant. > Thats been removed. So I'm doing pure master now.
> The paragraph above does not direct me to anything that I could > possibly use to learn if you have fixed the one thing that is for sure > messing everything up and explains the error messages that you have > still in this email. > > Remote debugging with incomplete information is a bit difficult, as we > just cannot see what you can see. I suggest you build everything in a > new directory with a different name that is not interfered with by > background processes. > > Thumbs pressed, other fingers crossed > > Steffen The total output of a failure is far too big to post to the list. Can you see my web site in the sig? I could capture it and post it there with a bit of scripting. > > > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > . Cheers, Gene Heskett. -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author, 1940) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers