Greetings . . .
Beginning to consider conductive coatings for EMC shielding. To be used inside a plastic cover (material as yet unknown) in a low power/voltage (SELV) application. This is unfamiliar territory. I'm sure someone on this listserv has experience with these. I know to at least consider shielding effectiveness, material compatibility (plastic housing material to coating), and end-user environment. What are some other critical criteria? Thanks. John A. Juhasz Product Qualification & Compliance Engineer Fiber Options, Inc. 80 Orville Dr. Suite 102 Bohemia, NY 11716 USA Tel: 631-419-2324 (direct) Fax: 631-567-8322 ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"