As I recall the DoC procedure and that new FCC mark was specifically aimed at computers and computer peripherals which previously had to be Certified by the FCC (prior to 97). It was a result of complaints from HP and Intel about the length of time it took the FCC to review submittals for Certification. It does not apply to any Class A devices which were already eligible for Verification (similar to DoC in practice) and was not meant to apply to other digital devices sold for use in the home (Class B) that are not “computers and computer peripherals”. ET Docket No. 95-19 BR- Andrew From: Charlie Blackham [mailto:[email protected]] Sent: Tuesday, September 21, 2010 2:56 PM To: [email protected] Subject: Re: [PSES] FCC DoC Gary I’ve used the following format, not dissimilar to EU DoC, which seems to cover requirements in 47CFR2 subpart J : We [Company Name] (of Manufacturer or Importer, which must be located within USA) [Company Address] (which must be located within USA) declare under our sole responsibility that the products: [Product name and number] to which this declaration relates are in conformity with the following regulations 47 CFR 15 [Signature] [name] [title] [date] Don’t know if it’s “right”, but never had any complaints J Regards Charlie From: McInturff, Gary [mailto:[email protected]] Sent: 20 September 2010 21:20 To: [email protected] Subject: [PSES] FCC DoC I think I’ve gotten a little sloppy in my documentation. The FCC back in about 1982 had a Declaration of Conformity very similar to the EU’s CE Declaration of Conformity, but I haven’t seen it used or used it in some time. Rather the product carried the required part 15 markings, and their was a heading in the manual that said FCC DoC that simply stated it was tested and passed Class A or B. The user warnings about moving things around or modifying the thing were in that section as well. Over time I had completely forgotten about the FCC DoC. Are these still being generated and can anyone give me an example of this, as I remember its an internally generated document one you got the official test complete at an approved lab. We generate all of the CE Documents, when appropriate, but this is the first time I’ve had a customer request one. We did send the test report but they are insistant that we give them a FCC DoC. Happy to obligue but would like to find the reference CFR 47 part 2(?) and an example if someone can share. Thanks Gary McInturff - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]>
All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> This message contains information that may be privileged or confidential and is the property of the Nemko Group. It is intended only for the person to whom it is addressed. If you are not the intended recipient, you are not authorized to read, print, retain, copy, disseminate, distribute, or use this message or any part thereof. If you receive this message in error, please notify the sender immediately and delete all copies of this message. Nemko Group can not be held responsible for transmission errors nor confidentiality of mail and faxes. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
