This afternoon's update: the resolution of the inductive current probes I have are limited to 10 Ma. All currents look like noise.
Peter Tarver > -----Original Message----- > From: Peter Tarver > Sent: Wednesday, April 26, 2017 09:29 > > Thank you, Pete. > > I have received an initial response from Kikusui requesting > additional information about the EUT and the test setup. > > I haven't looked at the waveforms yet, other than voltage. > That's on the docket. > > Regarding the matter of scale, (as I'm sure you're aware) the > Simpson 228 uses multiple measurement networks and was > the first commercially available leakage current meter to > address UL 1459 requirements. The Burn Hazard setting > (corresponding to 61010-1, Figure A.3, and the Kikusui > TOS3200, Network A) is 100 mA full scale and I am trying to > measure current below 1 mA. > > For shock hazard (Let Go and Reaction), the scale is OK. > > > Peter Tarver The information contained in this message may be privileged and confidential. It is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete or destroy any copy of this message! - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>