See below…
Sorry I can’t give more definitive answers to you. Ghery S. Pettit Chair, CISPR SC I From: Vincent Lee <000008e6c8d35910-dmarc-requ...@ieee.org> Sent: Sunday, March 18, 2018 12:25 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] IEC 62368-1 3ed, Final Draft International Standard (FDIS) Hi all, Good afternoon, 1) May I know where can one has access to IEC 62368-1 3ed, Final Draft International Standard (FDIS) ? If you are not active in creating this standard, or a member of your national committee voting on it, you don’t have access to the FDIS. It is not publicly available. 2) What are the major differences between IEC 62368-1 3ed and 2nd editions ? I can’t help you with that. I’m not familiar with the standard. 3) Is Sub-clause 4.1.1 on uses of IEC 60950/60065 Components still allowed in IEC 62368-1 3ed ? Same answer. If IEC 62368-1, Edition 3 has been published you’ll need to purchase a copy and look up the answer. Hope to hear from you soon. Thank you. Regards, Vincent - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org <mailto:emc-p...@ieee.org> > All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) <http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org <mailto:sdoug...@ieee.org> > Mike Cantwell <mcantw...@ieee.org <mailto:mcantw...@ieee.org> > For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org <mailto:j.bac...@ieee.org> > David Heald <dhe...@gmail.com <mailto:dhe...@gmail.com> > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>