Hi Vincent, See below my answers. I hope it helps. Best regards, Bostjan
From: Vincent Lee [mailto:000008e6c8d35910-dmarc-requ...@ieee.org] Sent: Sunday, March 18, 2018 8:25 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] IEC 62368-1 3ed, Final Draft International Standard (FDIS) Hi all, Good afternoon, 1) May I know where can one has access to IEC 62368-1 3ed, Final Draft International Standard (FDIS) ? * At the moment it is still draft FDIS stage – not final FDIS. Document is available only to working group HBSDT working on this standard. Final FDIS will be availabel for all members on NC TC108. 2) What are the major differences between IEC 62368-1 3ed and 2nd editions ? * corrected some issues, incorporated requirements for outdoor products, acceptance of fully insulated wire, changed requirements for evaluation of opening in fire enclosure, added alternative option for determination of clearances in primary circuit, added requirements for wirlesss chargers, … 3) Is Sub-clause 4.1.1 on uses of IEC 60950/60065 Components still allowed in IEC 62368-1 3ed ? * It remains in however EU might delete these acceptance inside EN standard. At the moment there is an EN amendment in circulation which would limit this acceptance in EU for 2nd edition of the standard by Dec 2020. Hope to hear from you soon. Thank you. Regards, Vincent - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org<mailto:emc-p...@ieee.org>> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe)<http://www.ieee-pses.org/list.html> List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org<mailto:sdoug...@ieee.org>> Mike Cantwell <mcantw...@ieee.org<mailto:mcantw...@ieee.org>> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org<mailto:j.bac...@ieee.org>> David Heald <dhe...@gmail.com<mailto:dhe...@gmail.com>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://www.ieee-pses.org/list.html (including how to unsubscribe) List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <sdoug...@ieee.org> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
