Ok, I am having an issue, it has done it to me twice now. I have the machine all setup as in the position of x y and z, I start to run my code and realize I might have an issue with my code so I click the pause button on the TKEMC screen, I verify it really is a proplem and I click the abort button. I removed fixture screw that I was going to hit and started the code again. The spindle promptly moves up about 2 or three inches and resets it zero position. My x and y axis also reset zero positions also I think by about .5 inches or so.
It has done it to me on two different programs, I am not using any offsets or other modes and no tool code. Just straight code. I can't remember if I paused the first time, I know I did the second time. This is a brand new install of Emc2 2.1.0 form the live download, I have installed it on to the computer. Now that I think about it, it did it on chips3d also, I just hit abort on that though. I didn't have the position right so I aborted, I reset the postions and pressed run, it promptly moved y down( I think) by about 2 inches and started in the wrong spot again. Is this just me? Andy ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
