You might try posting the question on CNCzone (www.cnczone.com). Ken
[EMAIL PROTECTED] Mark Kenny Products Company, LLC 55 Main Street Voice: (888)ISO-SEVO (888)476-7386 Newtown, CT 06470 Fax: (203)426-9138 http://www.MarkKenny.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jon Elson Sent: Friday, August 03, 2007 1:12 PM To: Enhanced Machine Controller (EMC) Subject: Re: [Emc-users] OT Encoder Question Kirk Wallace wrote: > Hello Richard, > > I have a Hardinge HNC that I am converting. Your description doesn't > match mine very well so I'll assume you have a different model, but I > did find that my spindle pulse generator had terminal pairs for both the > LED and the "amp" (+12 V and GND on both) along with the pulse and the > index pairs. I would be interested in knowing more about your machine > and what you plans are. Aha! That could, then, explain 5 pairs. Two power supplies, and A, B and Z. Jon ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users