The HAL with a good kernel and processor match and some optimiztion should be able to handle the job. Most of the mind work would be to see how much resolution you can get at the max rotation speed of the motor.
Rayh On Thu, 2007-11-29 at 19:54 -0600, Stuart Stevenson wrote: > Gentlemen, > This doesn't have anything to do with machine tools. I am starting > another project. I have retired my 1984 Mercury Lynx diesel. The body > rusted out and the car is not drivable. I bought a 1991 Mazda 323. > Alas, this is a gas motor car. I like diesel. I want to put the Mazda > diesel out of the Lynx into the 323. It will bolt up to the bell > housing. But, prior to installing it into the 323 I want to modify the > diesel motor. I want to install common rail injection. This will > require electronic control of the injectors and injector timing. This > is where EMC comes in. I want to have an embedded EMC control that > boots in 3 seconds or less and will control the injectors. I think EMC > should be able to do this easily and control other functions as well. > My goal is to have this modified and installed by next summer. > Stuart > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: The Future of Linux Business White Paper > from Novell. From the desktop to the data center, Linux is going > mainstream. Let it simplify your IT future. > http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- SF.Net email is sponsored by: The Future of Linux Business White Paper from Novell. From the desktop to the data center, Linux is going mainstream. Let it simplify your IT future. http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
