EVIC http://rbowes1.11net.com/dbowes/
Dick ----- Original Message ----- From: "Ray Henry" <[EMAIL PROTECTED]> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Sent: Thursday, November 29, 2007 6:44 PM Subject: Re: [Emc-users] diesel motor control > On Thu, 2007-11-29 at 21:31 -0500, John Kasunich wrote: > > The number of things that can go wrong in a PC is far more than in a > > simple microcontroller based system. > > > > To be honest, I'd stick with a mechanical injection pump - and I'm an > > electrical engineer! Mechanical things just seem more robust to me. > > I know the feeling but I was thinking about one class of motors that ran > at NAMES a few years ago. They used solenoids to drive the valves. I > thought progressive valve and injection timing was pretty neat. That > was not done with the EMC of the day, but could have been. > > To paraphrase someone, when EMC2 is the only tool you've got handy, > every problem begins to look like motion. And EMC2 is darn handy. > > Rayh > > > > > ------------------------------------------------------------------------- > SF.Net email is sponsored by: The Future of Linux Business White Paper > from Novell. From the desktop to the data center, Linux is going > mainstream. Let it simplify your IT future. > http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- SF.Net email is sponsored by: The Future of Linux Business White Paper from Novell. From the desktop to the data center, Linux is going mainstream. Let it simplify your IT future. http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
