I was just thinking that one possibility is I could not use the switches as 'home' switches. Just call them limits and manually home each axis.
Chris Jeff Epler wrote: > stepconf only gives a tiny, tiny subset of all the configurations that > can be created through emc2's HAL. It sounds like your home switch > configuration may be one that is not possible. You may be able to use > custom.hal and/or inifile tweaks after stepconf has run to get the > configuration you want, or you may be better off starting with a > traditional stepper_inch/stepper_mm configuration and editing it to > suit. > > Jeff > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users