On Fri, 5 Dec 2008, Eric H. Johnson wrote:
> Date: Fri, 5 Dec 2008 15:26:58 -0500
> From: Eric H. Johnson <[EMAIL PROTECTED]>
> Reply-To: "Enhanced Machine Controller (EMC)"
> <emc-users@lists.sourceforge.net>
> To: "'Enhanced Machine Controller (EMC)'" <emc-users@lists.sourceforge.net>
> Subject: Re: [Emc-users] Write error with hostmot2 and 7i43 board
>
> Peter,
>
> At this point I am just working out the configuration. I am not connected to
> anything as far as hardware. There is nothing connected to the P3 and P4
> connectors.
>
> Regards,
> Eric
Thats even more bizzare
I bought a D945GCLF2 to test with (at least the hardware) I'll try a EPP
loopback test next week and see if anything strange shows up...
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
------------------------------------------------------------------------------
SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada.
The future of the web can't happen without you. Join us at MIX09 to help
pave the way to the Next Web now. Learn more and register at
http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
