On Sun, Dec 21, 2008 at 1:01 PM, Richard Acosta <[email protected]> wrote:
> Is nothing about lazyness... is about being tired of to do something
> that is supossed to work.. and it does not! again and again and again.
>
> When going your lazy path i got the following two messages.
>
> "Acercar linea 10 en /usr/shareaxis/images/axis.ngc: bad character "x" used"
this message tells you there is something wrong near line 10 of the file:
/usr/shareaxis/images/axis.ngc
it even tells you what is wrong:
bad character "x" used
your response to this should be:
open the file with an editor and look for an "x" character on or near line 10
if you cannot figure out what the error is then post a copy of a few
lines prior and a few lines past
someone will try to help you
people are trying to help you now - they just don't have enough information
>
> "RTAPI:: ERROR: Unespected realtime delay on task 1
> This Message will only display once per session.
> Run the Latency Test and resolve before continuing"
this is a separate problem - you may run your machine but you may
experience hesitation during motion as something about the hardware is
using too much time.
>
> And all lights are always ON as they are from startup.
>
> When using the old driver/firmware on 2.2.6, at least lights went off,
> then init and done turned on, this time, nothing. When using the config
> samples provided by Ted Hyde, lights go off and never come back on, and
> then the "Unknown Command Error".
>
> It seems to me, that firmware is not loading at all
>
>
>
> El 20/12/08 14:27, Peter C. Wallace escribió:
>> Also other than logging in, I didn't have to type _anything_
>> to get EMC running with the 7I43
>>
>> Heres the (lazy) path I followed:
>>
>> Install EMC 2.2.6 from LiveCD
>>
>> Upgrade to 2.2.7 (via synaptic)
>>
>> Upgrade to 2.2.8 (via synaptic)
>>
>> launch emc from menu
>>
>> double click on hm2servo
>>
>> UP AND RUNNING!
>>
>> Peter Wallace
>> Mesa Electronics
>>
>> (\__/)
>> (='.'=) This is Bunny. Copy and paste bunny into your
>> (")_(") signature to help him gain world domination.
>>
>>
>> ------------------------------------------------------------------------------
>> _______________________________________________
>> Emc-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>
>>
>
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Emc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
>
------------------------------------------------------------------------------
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
