On Fri, 2009-01-16 at 09:12 +0000, Tom wrote:
> Gene Heskett <gene.hesk...@...> writes:
> snip...
> > That pretty much leaves noise pickup or ground loops.  All grounds should 
> > be 
> > star topology and tied well to the 3rd pin of a power plug.  Shielding on 
> > cables should be tied to ground at only one end else that can setup a 
> > ground 
> > loop...
> Mike,
> 
> I second Gene's take on your problem. There is spurious noise in your limit
> sense inputs which is triggering the limits as far as Emc2 is concerned.  I 
> had
... snip
> shorter than -- duration (you set the time constant). If you do a search here 
> in
> this forum on "debounce filter" you should find plenty of information. 
> 
> Tom

Has anyone tried using a fiber optic link for sensors?
---------
Kirk
http://www.wallacecompany.com/machine_shop/



------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to