On Tue, 2009-02-03 at 21:06 +0100, Peter blodow wrote: > Thank you, but my stepper card can only master 5 kHz step frequency at > maximum. Speed can't be my goal, but reliability. My drilling machine goes > 40 mm per turn of a stepper (giving 1/10 mm resolution) so 5 kHz is plenty. > > But: What about the following error? > > Peter Blodow
The following errors appear when emc2 tries to go faster then the stepgens can generate steps. That means you probably have MAX_VELOCITY too high in your ini file. It would be good to read this now (since you are doing it by hand, not by stepconf): http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?TweakingSoftwareStepGeneration Regards, Alex ------------------------------------------------------------------------------ Create and Deploy Rich Internet Apps outside the browser with Adobe(R)AIR(TM) software. With Adobe AIR, Ajax developers can use existing skills and code to build responsive, highly engaging applications that combine the power of local resources and data with the reach of the web. Download the Adobe AIR SDK and Ajax docs to start building applications today-http://p.sf.net/sfu/adobe-com _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
