Depends if it is a machine tap, hand taps dont have the spiral to clear the chips, worse would be tolerance of the hole bottom depth, A, dont hit it. B, leave space for chips Use a machine tap that clears chips back up the flutes.
Dave Caroline On Fri, Mar 25, 2011 at 2:01 AM, Igor Chudov <ichu...@gmail.com> wrote: > I would like to know if I can do rigid tapping with a bottoming tap? > ------------------------------------------------------------------------------ > Enable your software for Intel(R) Active Management Technology to meet the > growing manageability and security demands of your customers. Businesses > are taking advantage of Intel(R) vPro (TM) technology - will your software > be a part of the solution? Download the Intel(R) Manageability Checker > today! http://p.sf.net/sfu/intel-dev2devmar > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Enable your software for Intel(R) Active Management Technology to meet the growing manageability and security demands of your customers. Businesses are taking advantage of Intel(R) vPro (TM) technology - will your software be a part of the solution? Download the Intel(R) Manageability Checker today! http://p.sf.net/sfu/intel-dev2devmar _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
