On 3/27/2011 10:47 AM, Stephen Wille Padnos wrote: > Wouldn't these still leave a few threads at the bottom that aren't fully > formed? Do you find that bolts can be threaded further into the hole > than with a cutting tap?
A bottoming roll form tap will get you very close to the bottom. If you really need that last thread or two, you could always follow up with a bottoming cut tap. As the hole is larger than normal for a given size, there's no trouble, but those last couple threads won't be full form. Jon ------------------------------------------------------------------------------ Enable your software for Intel(R) Active Management Technology to meet the growing manageability and security demands of your customers. Businesses are taking advantage of Intel(R) vPro (TM) technology - will your software be a part of the solution? Download the Intel(R) Manageability Checker today! http://p.sf.net/sfu/intel-dev2devmar _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users