On 7/24/2011 9:12 AM, gene heskett wrote: > Hi everybody; > > I made another try at running emc over ssh -Y again this morning, but it > fails shortly after opening an incomplete axis screen, as follows: > > Starting EMC2... > X Error of failed request: BadLength (poly request too large or internal > Xlib length error) > Major opcode of failed request: 136 (GLX) > Minor opcode of failed request: 1 (X_GLXRender) > Serial number of failed request: 2579 > Current serial number in output stream: 2580 > Shutting down and cleaning up EMC2... > > And of course the above is far more informative than the two log files it > suggests I read. > > That machine is of course using the vesa driver, this one the most recent > nvidia blob. > > > From glxinfo on that machine: > direct rendering: No (LIBGL_ALWAYS_INDIRECT set) > > Is this miss-match the root cause of the problem? > > And, short of switching to a non-axis interface with no backplot abilities, > is there a workaround? > > Thanks folks. > > Cheers, gene Gene:
Before I embarrass myself by offering up suggestions that are completely off the mark (which I may end up doing anyway!), can you be more clear about the X-client and X-server machines you are using. Remember, the remote machine running emc2 is the X-client and the local machine running your keyboard and display is the X-server. Maybe I'm just being thickheaded, but when you talk about the cards and drivers you have used, it sounds as if you are talking about the X-client. Presumably it is the X-server that isn't providing the service requested by AXIS, n'est-ce pas? So, how about a thumbnail sketch of both machines and software versions? Regards, Kent ------------------------------------------------------------------------------ Magic Quadrant for Content-Aware Data Loss Prevention Research study explores the data loss prevention market. Includes in-depth analysis on the changes within the DLP market, and the criteria used to evaluate the strengths and weaknesses of these DLP solutions. http://www.accelacomm.com/jaw/sfnl/114/51385063/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
