Thank you to all who helped. It works with S1. Peter
-----Ursprüngliche Nachricht----- Von: Chris Morley [mailto:chrisinnana...@hotmail.com] Gesendet: Samstag, 3. September 2011 19:10 An: EMC Betreff: Re: [Emc-users] M3/M4 and M5 > > This gives me in the Axis display to buttons to turn the spindle on > and off. When pressing the two buttons with the left mouse button or > F9 the pin > 14 followes the state of the buttons of the display, maening going > high and low. When trying to turn the spindle on with M3 or M4, from > the MDI console or from a G-Code file, the buttons follow the commands > (M3 / M4) but not the pin 14. When I manualy turn the spindel on with > the mouse or F9, the command M5 turns the spindel off and pin 14 goes > low representing the state of the buttons. > > What did I wrong? > > Any help would be higly appreciated. > Its a quirk of EMC. Try setting a spindle speed. eg s1 before setting m3 or m4 (AXIS does this internally) Chris M -------------------------------------------------- ---------------------------- Special Offer -- Download ArcSight Logger for FREE! Finally, a world-class log management solution at an even better price-free! And you'll get a free "Love Thy Logs" t-shirt when you download Logger. Secure your free ArcSight Logger TODAY! http://p.sf.net/sfu/arcsisghtdev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-u sers ------------------------------------------------------------------------------ Special Offer -- Download ArcSight Logger for FREE! Finally, a world-class log management solution at an even better price-free! And you'll get a free "Love Thy Logs" t-shirt when you download Logger. Secure your free ArcSight Logger TODAY! http://p.sf.net/sfu/arcsisghtdev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
