Thanks Fox and Andy;
That's what I needed.
It's embarrassing the times I looked over the last line of the page of
motion.xxx information to try to make sense of the motion.position group on
the next page.
I guess that proves "if one doesn't know what they are looking for, they
won't know when they find it".
Thanks again
Don
2011/9/8 Fox Mulder <[email protected]>
> Am 08.09.2011 22:22, schrieb Don Stanley:
> > Thanks Andy;
> > The thing I am stumbling over is What to connect the touch switch pin to
> > in the .hal file. After that I have no idea ask but I think you may have
> > answered some of it.
>
> The intenal signal is "motion.probe-input" which you should connect to
> the probe switch.
>
> a few months ago i wrote a little skript (tool-length-set.ngc) which
> measures all tool lengths and writes the offset to the reference tool
> into the tool table.
> The reference tool is the first one in the script and has no tool number
> (T0). The comments are mostly german but i think the script is not very
> complex to understand. :)
>
> Ciao,
> Rainer
>
>
>
> ------------------------------------------------------------------------------
> Doing More with Less: The Next Generation Virtual Desktop
> What are the key obstacles that have prevented many mid-market businesses
> from deploying virtual desktops? How do next-generation virtual desktops
> provide companies an easier-to-deploy, easier-to-manage and more affordable
> virtual desktop model.http://www.accelacomm.com/jaw/sfnl/114/51426474/
> _______________________________________________
> Emc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
>
------------------------------------------------------------------------------
Doing More with Less: The Next Generation Virtual Desktop
What are the key obstacles that have prevented many mid-market businesses
from deploying virtual desktops? How do next-generation virtual desktops
provide companies an easier-to-deploy, easier-to-manage and more affordable
virtual desktop model.http://www.accelacomm.com/jaw/sfnl/114/51426474/
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
