never had occasion to try one, but: http://www.use-enco.com/cgi/INSRIT?PARTPG=INSRAR2&PMAKA=317-4576&PMPXNO=19497976
--- On Sat, 2/25/12, Przemek Klosowski <przemek.klosow...@gmail.com> wrote: From: Przemek Klosowski <przemek.klosow...@gmail.com> Subject: Re: [Emc-users] Film Emulsion for Encoder Wheels? To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Date: Saturday, February 25, 2012, 11:44 PM what about using a slit saw mounted in the spindle, cutting slots in the wheel mounted in a horizontal-axis rotary table? Of course few of us have motorized rotary tables, but manual as it is, it should be possible to get finer slots than what endmills can cut. ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
