On Mar 30, 2012, at 1:37 PM, Viesturs Lācis wrote: > 2012/3/30 Jeshua Lacock <jes...@3dtopo.com>: >> >> Actually, perhaps I spoke too soon. On the box it states "Add a dual voltage >> high-speed parallel port (EPP/ECP) to your computer". > > EPP mode is needed only and exclusively for external fpga boards. > If Your goal is software step generation, then You do not need the EPP mode.
I understand now, thanks. >> So can anyone suggest what I might have to do to use the card with EMC2? > > I guess that one of these c090, c080, c070, c060 or c020 is the port > address, which should be specified in the HAL file (sorry, I am not > that smart to know, which one exactly; trial-and-error method is my > best friend in such cases). > Other than that - treat it as usual parallel port. So how would that be specified? 0c090? The default is 0x378. Best, Jeshua Lacock Founder/Engineer 3DTOPO Incorporated <http://3DTOPO.com> Phone: 208.462.4171 ------------------------------------------------------------------------------ This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users